Highlight: Underground Welded Ball Valve

Product introduction:

Full welded directly bured bal valve, can be directly buried deep underaround, Don't set underground valve control, so that the operator does not neecto enter the underground, only on the ground with a T-handle transmission operation, very convenient to avoid the past dueto set underground valvecontrol room is not safe hidden trouble.

Full welded directly buried ballvalve, can according to user's gas pipeline buried depth,to design different height of the valve for you. At the same timealso can according to customer's different need of valve end connections, desian a variety of port connection for you, for your choice.

Product technical parameters:

Product features:

1. Welded ball valve body uses the all welded structure, there won’t be the phenomenon such as external leakage, the valve structure is more compact, easy installation.

2. Low operating torque: valve adopts has the self-lubricating backing PTFE metal collar, small friction torque, to ensure that the valve to operate under the condition of the low torque.

3. Double block and excretion function (DBB): both sides of the valve in the closed position and the ball under pressure at the same time, the body lumen of medium (water, gas or oil etc) from the drain valve discharge.

4. Double piston effect seat structure design: both sides of the seat under the action of pressure seal (double piston effect) double sealing seat design features, once the upstream seat is damaged and leakage, medium pressure on the downstream side into the valve cavity, the seat into the sphere close contact, can seal the downstream seat.

5. Reliable seating, structure of floating seat, the seat can be freely floated along the center-line of the valve, for two-way valve seal, under the condition of low pressure, initial seal were obtained through the seat after the spring load, with the increase of pipeline pressure, supplemented by spring force after the seat ring, to keep close contact with the ball seat, reliable sealing effect, seat sealing adopts combined sealing structure, primary sealing can effectively prevent solid particles of the sealing surface is damaged, the secondary seal is rubber ring seal, can guarantee to achieve “zero” leak valve sealing requirements, according to the operation condition, the seat can be embedded in polymer engineering plastic seals.

6. Light and fast operation mode: manual operation using both level and new type of worm gear combination way both available, than ordinary network type worm gear box faster operation of portable, convenient from operation, fixed ball valve actuators for manual, pneumatic, electric, gas and liquid linkage for user selection etc. Factory is responsible for the overall assembly quality, transportation, commissioning.