Highlight: Lift type check valve

Product introduction:

A lift check valve is a type of check valve in which the disc slides along the vertical centerline of the valve body. Its structure

is similar to that of a globe valve, with the body and disc being the same as those of a globe valve. A guide sleeve is

machined on the upper part of the disc and the lower part of the bonnet, allowing the disc to move up and down freely within

the guide sleeve. When the medium flows in the forward direction, the disc is pushed open by the medium's thrust. When the

medium stops flowing, the disc drops onto the valve seat by its own weight, preventing the reverse flow of the medium. This

type of valve is widely used in various fields such as chemical, metallurgical, and pharmaceutical industries, and should be

installed horizontally in pipelines.

Product technical parameters:

Product features:

1. check valve must be installed and used, that is medium flows in the direction of the arrow shown.

2. Its small volume, light weight, good processing technology, is one of the development direction of check valve, but the fluid resistance coefficient is slightly larger than swing check valves.

3. When the medium flows in the specified direction, the valve disc is subject to the action of the medium force, when the medium counter flow is opened, due to the weight of the valve disc and the valve disc is subject to the action of the medium reverse force, so that the sealing surface of the valve disc and the valve seat is closed, to prevent the medium flow-back purpose.

4. The sealing surface of valve body and disc is overlaying with stainless steel